Your TMS Information Source Since 2012

Have a TMS tip? Share it here and keep up with latest on our Facebook Page or Twitter!

November 2014

Friday Report - November 7, 2014

Posted by bernell on November 7, 2014

TMS PRE-PRODUCTION UPDATE 11-7-2014

Wilkinson County:

Halcón Fassman 9H-1
, truck access road is located off Hwy 61 onto Sam Leake Road, then to Whetstone. Well is flowing back from a 5,329 foot lateral with an official test day production of 909 barrels and total September production of 18,427 barrels.


Halcón Shuckrow 10H-1, located on Sam Leake Road about 5 miles east of Hwy 61 has finished drilling.  Fracking is complete. Should be flowing back.
 
Halcón S D Smith 1H, located on the Jackson Louisiana Road south of Woodville. H&P Flex 3 Rig# 249 completed a 7,556' lateral. Flowing back.  Very early numbers include a Day 11 test production rate of 686 barrels.  

Halcón George Martens 1H, located on the west side of the south lane of Hwy 61 south of Woodville a couple of miles. Spud 8-8-2014 and completed around the 8th of September.  Targeted lateral length was 7,000 foot.  Well should be flowing back shortly.


Halcon Gaulden 1H, located on Louis Gaulden Road about 4 miles east of Hwy 33 roughly 3 miles south of Centreville. H&P Rig # 623 spud on September 10. Word is this well likely had insurmountable drilling issues.

  
Halcon Creek Cottage West 1H.  H&P Flex 3 Rig #249 completed drilling this well earlier this week.  The rig has moved to the nearby Rogers well site. The Creek Cottage is located on Whitestown Road a couple of miles south of Hwy 24.  Awaiting fracturing operations.

Halcon Rogers 1H, accessed from Hwy 24 west of Centreville about 5 miles.  H&P Flex Rig # 249 spud (began drilling) 10-23-2014.

 

Goodrich CMR-Foster Creek 8-H-1 and 2, access from 24 on Hiram McGraw Road to Macedonia Road, then a mile or so down Helmer Road. Nabors Rig #624 spud -1 on 9-15 and spud -2 on 9-21.  No updated info…drilling away.

Comstock CMR Foster Creek 28-40 No. 1H, located on Will Floyd Road. Access appears to be south off of Hwy 563 on to Macedonia Road, then on to Netterville Road, then on to Will Floyd Road. Trinidad Rig #103 began drilling on August 14.  Whatever issues have occurred with this well, it is reportedly back drilling as of this week.


Sanchez Morris 1H, RAPAD Rig #31 spud October 13.  Accessed from the Pickneyville Road...Traveling west out of Woodville, turn north (right) just past the Old River water tank on to an otherwise private road. (Unless you have business at the oil site, please respect the privacy rights of the landowner.) Drilling away.
 
Amite County:


Sanchez St. Davis #1, accessed from Hwy 24 in Gloster, located down Kahnville Road about 6 miles southeast of Gloster. RAPAD Rig #31 spud 9-2-2014.  This well was drilled above the rubble zone in what may be a TMS record time of about 24 days with a lateral of 5,600’.  Plugs drilled out.  In early stages of flow back.

Encana Ash 13H-1 and 13H-2, Located on the east side of Ash Road, accessed via Lower Centreville Road about 3 miles southeast of Centreville. Trinidad Rig # 124 spud July 21.  Fracking operations underway.

Encana Sabine 12H-1 and 12H-2, located off of Enterprise Road, south of Hwy 24 about 3 miles out of Liberty, access is from Hwy 48. Trinidad Rig # 125 spudded 12H-1 on June 20 and 12H-2 on June 23. Plugs being drilled out.

Goodrich T. Lewis 7-38H-1 located from the same access road as the EnCana Lewis 7-18H-1 off of County Farm Road a mile or so north of the Lower Centreville Road, accessed off of the Greensburg Road, located about 6 miles south of Liberty.  Ensign Rig #753 should be moving on site shortly.

Encana Longleaf 29H-1 and -2, located off Tobias Lane off of Hwy 584 roughly 3 miles southeast of Liberty. Trinidad Rig # 125 spud -2 on September 30 and -1 on 10/4.  -1 has intermediate cemented in place. -2 reached total depth Monday, November 10. Drilling progressing well.


Encana Mathis 29-17H-1, located on the same pad as Mathis 29-32H-1 off of Bean Road west of Gillsburg in south Amite County.  Trinidad Rig # 124 spud October 17. Drilling in the lateral with a goal of 9,000 foot.

EnCana Lawson 25-13H-1, located on the same pad as the Lawson 25H-1 in Downtown Gillsburg, Mississippi.  Trinidad Rig # 124 may once again be serving as the Gillsburg Christmas Tree, but it is uncertain the rig will be on this pad or on the nearby Bergold/Stewart pad.


Pike County: A permit has been approved for 1 Sanchez unit and is pending for 2 units applied for by both Sanchez and VirTex.

St. Helena Parish:

Comstock Meeks 56 HZ-1, located on Martin Lane north of Hwy 38 off of Hwy 441, just south of the Mississippi line and the Encana Lawson 25H-1.  Trinidad Rig # 103, now located in Wilkinson County, is scheduled for this site once 2 wells are completed in Wilkinson County...maybe by Christmas.

St. Tammany: Permit pending.

Washington Parish: Permits pending, site preps completed.  Note the latest permitted unit in Tangipahoa Parish, the Goodrich B-Nex 43H-1, will nose over into Washington Parish.

Tangipahoa:

Goodrich Verberne 5H-1, located south of Hwy 38 on Hwy 1061. Nabors X-17 spud 8-25.  Completed total drill of 18,938 foot. Awaiting fracking.  Rig moved to Kent 41H site.

Goodrich Williams 46H-1 has the Ensign Rig #753 spud 9/11. Intermediate completed. Completed total drilling depth of 18,650 foot. This rig is moving the T. Lewis 7-38H-1 site in Amite County.

Halcon Franklin PST Prop H-1, H&P rig # 623, will be moving to the Franklin PST Prop H-1 site south of Osyka in the Greenlaw Field.  This site is east of Hwy 51 “behind Skinny’s”, I’m told.  Skinny’s being an eating establishment well known to the area. Well spud November 1.  Drilling at 2,910 as of Monday, November 3.

Goodrich Kent 41H-1, Nabors X-17 moving on site.  Should spud early next week. Site is located, I'm told on Monroe Stevens Road, accessed via Hwy 440/1057 to Hwy 1058 to B Brown Road, then to Monroe Stevens Road.

East Feliciana: Permits in process…

West Feliciana:

Halcon Walker drill, previously scheduled, has been delayed.

 

Remember to follow us on Twitter!

 

https://twitter.com/TMS_Horizons

 



What do you think about it?