The Friday Report - 6/20/14
June 20, 2014 pre-production TMS report.
Wilkinson County:
EnCana Pintard 28H-1, located roughly 3 miles north of Centreville off Macedonia Road- Flowing back...no report...rumors are a successful well.
Halcon Blackstone 4H-2, located roughly halfway between Centreville and Woodville on the south side of Hwy 24, H&P FlexRig# 249 drilled a 5,400' lateral in 28 days (Great job!)
Awaiting a fracturing.
Halcon Fassman 9H-1, access road is located north of Hwy 24 off of Leake's Road via Coon's Mill Rd. Brand spanking new H&P Flex3 Rig # 623 spudded May 29. Drilling away.
Halcon S D Smith, located on the Jackson Louisana Road south of Woodville. H&P Flex 3 Rig# 249 spudded June 9, 2014. Drilling away!
Goodrich CMR Foster Creek 24-13, access from Hwy 24 on Hiram McGraw Road to Macedonia Road, then to end of Helmer Road. Nabors Rig # 624 spudded May 30. Dealing with not so unusual issues, but drilling away!
Sanchez Dry Fork Creek #2H, RAPAD Rig # 31 spudded May 21, 2014, Access via Whetstone Road off of Hwy 563, north of Woodville. Drilling in the lateral at around 16,000'.
EnCana Pintard 28H-2, located roughly 3 miles north of Centreville off Macedonia Road- Trinidad Rig # 124 spudded June 3, intermediate casing in place and should be drilling in the lateral...
Amite County:
Encana Lewis 7-18H-1, located about 1 mile north of the Lower Centreville Road off of the County Farm Road roughly 7 miles south of Liberty. Seven of 29 stages completed as of this morning. Over an 8,000' lateral if all goes as hoped. Long lateral in an excellent area, using most up-to-date fracturing technology...this could be the next king of the TMS. We shall see!
Encana Lyons 35H-1-Located 2 miles east of Centreville, north of Hwy 48, just west of Pepper House Rd- Flow back started. Awaiting report.
Encana Lyons 35H-2- Located on same site as Lyons 35H-1, Trinidad Rig # 125 - drill reportedly completed around June 11 with about a 5,000' lateral. Preparing for fracturing operations.
Encana Sabine 12H-1, located off of Enterprise Road, south of Hwy 24 about 3 miles out of Liberty...Trinidad Rig # 125 reportedly spudded today, June 20.
EnCana Mathis 29-32H-1, Located on the Louisiana line due south of the Anderson 17H unit, just off of Bean Road in T1N, R5E. Schlumberger completed fracturing of 17 stages. Plugs reportedly drilled out and in the early days of flow back.
Goodrich Nunnery 12-1H-1 -Located on the east side of Claude Smith Road, along Pike County line, about 3 miles west of Magnolia. Goodrich reported an initial potential production of 785 barrels of oil and total BOE of 815. This well was in the 50'-80' 5 ohms of resistance area, the first well in a thickness area under 80' drilled.
Goodrich Bates 25-24H-1, located roughly 2 miles northeast of Liberty off of Hwy 569 North, Ensign Rig # 753 spudded May 12.
Reportedly drilling at about 16,000' Should be completing drill soon if all goes as expected.
Goodrich Denkmann 33-28H-2, located in Amite County on the Mississippi/Louisiana line in T1N, R4E. Accessed from the Louisiana side through Weyerhaeuser roads off of Tolar Hurst/Parish Road 181 off of Hwy 1044 north of Hwy 38. Nabors X-17 spudded May 23. Completed drilling in 25 days with an approximate lateral of 6,200'. Preparing for fracturing operations. No report where Nabors X-17 is headed next...be on the look out...it may be headed your way! (I'm guessing the Nabors will be drilling a sister well to the Blades 33H-1 in Tangipahoa Parish, but I have no direct knowledge of this.)
St. Helena Parish-
Goodrich Weyerhaeuser 51H-Located about 2 miles west of Chipola- Goodrich reported on Monday March 24 this well would not be a good one and that they were still working on the flow back. Awaiting official report.
East Feliciana-
Goodrich Beech Grove 94H-1- Located about 4 miles east of Wilson, LA off of Carruth Road. Halliburton completed a 21 stage fracture on June 12. Plugs drilled out successfully and in early stages of flow back.
West Feliciana-
Goodrich SLC 81H-1- Ensign Rig #751. Drilling complete. Awaiting fracturing. Ensign Rig # 751 is rumored to be retiring after this completion...new replacement rig to be arriving soon.
........
All rigs currently assigned in the TMS should be finished with at least a first well in the next couple of weeks, meaning we'll enter July with 16-20 wells drilling or awaiting fracture/drillout/flow back.
Our young shale play is growing up right before out eyes.
Amazing!
